Implementasi Software Solidworks dalam Perancangan Produksi Lemari untuk Efisiensi Waktu Produksi
DOI:
https://doi.org/10.37481/sjr.v8i1.1030Keywords:
Solidworks, Product Design, Cabinets, Time Efficiency, ProductionAbstract
The design of furniture products, such as cabinets, requires precision and considerable time, especially in the design and prototyping stages. With the development of technology, the use of computer-aided design (CAD) software such as Solidworks is a solution to improve efficiency in product design. This journal discusses the implementation of Solidworks in cabinet planning, with a focus on reducing production time and improving design accuracy. Through the use of Solidworks, the design process can be digitized, allowing designers to create more accurate and easily modifiable 3D models, and reducing errors that often occur in manual design. In addition, the simulation and analysis features in Solidworks also facilitate the identification of problems before the production stage begins, thereby reducing the risk of errors in the manufacture of cabinets. The results of this software application show that the time required to design cabinets can be significantly reduced, by increasing the efficiency of production time, reducing material waste, and accelerating prototyping. Therefore, the use of Solidworks is very effective in improving time efficiency and product quality in the furniture industry.
References
Jones, S. R. (2019). Introduction to SolidWorks for Engineers, 3rd ed. Pearson.
A. D. Smith. (2021). Design Efficiency and Time Reduction through CAD Applications, Journal of Manufacturing Technology, vol. 45, no. 3, pp. 213-225.
P. W. Baker. (2020). The Impact of 3D Modeling on Product Design, International Journal of Product Development, vol. 32, no. 2, pp. 85-100.
R. H. Patel. (2018). SolidWorks: An Engineering Perspective, Wiley.
Liu, F. (2020). Fast industrial product design method and its application based on 3D CAD system. Computer-Aided Design and Applications, 18(S3), 118-128.
Yang, C., Weng, Y., Huang, B., & Ikbal, M. (2021). Development and optimization of CAD system based on big data technology. Computer-Aided Design and Applications, 19(S2), 112-123.
Hunde, B. R., & Woldeyohannes, A. D. (2022). Future prospects of computer-aided design (CAD)–A review from the perspective of artificial intelligence (AI), extended reality, and 3D printing. Results in Engineering, 14, 100478.
Zhao, X. (2020). Application of 3D CAD in landscape architecture design and optimization of hierarchical details. Computer-Aided Design and Applications, 18(S1), 120-132.
Yao, X. (2021, August). On the Application of Computer CAD Drawing Software in Civil Engineering Architectural Design and Structural Design. In Retracted on September 15, 2021 The Sixth International Conference on Information Management and Technology (pp. 1-4).
Mohanavel, V., Ali, K. A., Ranganathan, K., Jeffrey, J. A., Ravikumar, M. M., & Rajkumar, S. (2021). The roles and applications of additive manufacturing in the aerospace and automobile sector. Materials Today: Proceedings, 47, 405-409.
Chen, Y., Wang, Q., Wang, C., Gong, P., Shi, Y., Yu, Y., & Liu, Z. (2021). Topology optimization design and experimental research of a 3D-printed metal aerospace bracket considering fatigue performance. Applied Sciences, 11(15), 6671.
Appadurai, M., Raj, E. F. I., & Venkadeshwaran, K. (2021). Finite element design and thermal analysis of an induction motor used for a hydraulic pumping system. Materials Today: Proceedings, 45, 7100-7106.
Ugli Tokhirov, A. I. (2021). Technological process development using CAD-CAM programs. Science and Education, 2(6), 288-291.
